Effects of microelements on soil nematode assemblages seven years after contaminating an agricultural field

Long-term effects of Cd, Cr, Cu, Se and Zn were studied 7 years after artificially contaminating plots of an agricultural field on a calcareous chernozem soil. Effects of three to four different contamination levels (originally 10, 30, 90 and 270 mg kg⁻¹) were studied. Nematode density was significantly reduced by 90 and 270 mg kg⁻¹ Se as well as by 270 mg kg⁻¹ Cr, while 90 and 270 mg kg⁻¹ Se also reduced nematode generic richness. Maturity Index values (calculated for c-p 2–5 nematodes) consistently decreased with increasing Cr and Se concentration and to a lesser extent in Zn plots as well. Structure Index showed decreasing trends in increasing Cr, Se and (to a lesser extent) in Zn treatments, while in Cd it shows a moderate increase. Distribution of c-p groups was negatively affected by the increasing Cr and Se concentration, while in Zn plots, this decrease was not significant. Response of feeding groups to pollutions was similar to other parameters: Cr and Se caused significant changes toward the loss of variability. The proportion of the most sensitive omnivorous and predatory nematodes decreased clearly as a consequence of Cr and Se treatments. Zn pollution also resulted in a slight decrease in this group, while Cd caused an increase. Nematode diversity profiles showed a significant decrease in the plots of increased Cr and Se concentrations, while increased concentrations of Cu and Zn resulted in ambiguous effects. Besides providing evidence on the harmful effects of Cr and Se on a soil nematode assemblage, our results suggest that simultaneous analysis of Maturity Index, Structure Index and diversity profiles provide a promising tool in nematological indication of soil pollution.     

Some chemical properties of hazelnut husk and its suitability for particleboard production

Hazelnut husk is a renewable natural resource that has not industrial utilization yet. The objective of this study was to examine some chemical properties (holocellulose, cellulose, lignin and ash contents, alcohol–benzene, hot and cold water solubility and solubility in dilute alkali (1% NaOH)) of hazelnut husk and to evaluate its suitability to produce composite panels. For this study, particleboards were produced using hazelnut husk as an alternative raw material for the forest products industry. Two panel density levels (0.6 and 0.7 g/cm³) and three types of resins (urea-formaldehyde (UF), phenol formaldehyde (PF), melamine-formaldehyde (MUF)) were selected as treatments. The findings indicated that hazelnut husk waste is a valuable renewable natural resource for particleboard production and could be utilized as a substitute for wood in board production. Its shortcomings, such as higher water absorption and thickness swelling could easily be controlled by adding water repellent chemicals in production. The bending and the internal bond strength properties of the hazelnut husk boards produced met the requirement for the general purpose product standards (TS-EN 312-2) at 0.70 g/cm³ density.     

Measurement of the emanation of radon-222 from danish soils

The radon-222 emanation from 70 samples of Danish soils, subsoils, and sedimentary rocks has been measured.Two methods have been employed. The first one is to follow the growth of the radon concentration in a radon-tight sample container by transferring small air samples to a scintillation flask detection system. The second one is to measure the equilibrium gamma-activities of lead-214 and bismuth-214 in the sample when the sample container is open and, subsequently, when it is closed.Based on the measured emanation rates the samples are grouped in three classes: 1) less than 5 atoms · sec^?1 · kg^?1, 2) from 5 to 10 atoms · sec^?1 · kg^?1, and 3) more than 10 atoms·sec^?1. In class 3) some diatomitic clays have shown emanation rates as large as 100 atoms·sec^?1·kg^?1.     

Assessing landscape perception of urban rocky habitats

The urban landscape structure and its changing characteristics have produced various effects on natural and human systems of its own and surroundings [Gilbert OL. The ecology of urban habitats. London: Chapman & Hall; 1991 [1]; Rebele F. Urban ecology and special features of urban ecosystems. Global Ecology and Biogeography Letters 1994;4:173–87 [2]; Rees WE. Urban ecosystems: the human dimension. Urban Ecosystems 1997;1:63–75 [3]; Pickett STA, Cadenasso ML, Grove JM, Nilon CH, Pouyat RV, Zipperer WC, et al. Urban ecological systems: linking terrestrial ecological, physical, and socioeconomic components of metropolitan areas. Annual Review of Ecology and Systematics 2001;32:127–57 [4]; Hope D, Gries C, Zhu WX, Fagan WF, Redman CL, Grimm NB, et al., Socioeconomics drive urban plant diversity. Proceedings of the National Academy of Sciences of the United States of America 2003;100(15):8788–92 [5]; Pickett STA, Cadenasso ML, Grove JM. Resilient cities: meaning, models, and metaphor for integrating the ecological, socio-economic, and planning realms, Landscape and Urban Planning 2004;69(4):369–84 [6]; Luck M, Jianguo Wu J. A gradient analysis of urban landscape pattern: a case study from the Phoenix metropolitan region, Arizona, USA. Landscape Ecology 2002:17(4):327–39 [7]; Angold PG, Sadler JP, Hill MO, Pullin A, Rushton S, Austin K, et al., Biodiversity in urban habitat patches. Science of the Total Environment 2006;360(1–3):196–204 [8]]. By environmental literature conducted recently, it has been evidently comprehended that urban life quality for mankind and others can be improved by serving these systems with green and living elements. This study is to investigate urban rocky habitats that have special natural characteristics and that can be implicated for urban green areas. But these habitats have been considered as nature splits withstanding against the urban pressures by means of the unplanned build-up activities foremost, and road construction, poor quality or neglected remnants. Therefore, this study presents the environmental perception and preferences of urban rocky habitats which are threatening within excessive urbanization and human use of natural areas in the context of the city of Trabzon, Turkey. So, a total of 20 habitats selected from urban and surroundings were surveyed by using a questionnaire and landscape assessment approach. With surveying performed on 204 participants, visual preferences, landscape attributes and proposed management options for urban nature conservation were determined. The χ²${\chi }^2$-test results revealed clearly that the demographic and expertise status of the participants were correlated with the preferences for types of rocky habitat scene and management options. The scenes with natural elements and less human disturbance obtained higher scores on visual preferences than any of the urban rocky scenes lacking these characteristics. Also, in the quantitative phase, factor analysis based on principal component structure revealed the ‘visual and spatial effects’, the ‘usage and arrangement’, the ‘naturalness and ecological value’, and the ‘functionality’ components of the scenes. Consequently, some implications for the effective and efficient planning and development of urban nature conservation by assisting the better understanding of the various patterns of landscape preference, choice and satisfaction in habitats under the present study were suggested.     

Estimation of total equivalent temperature difference values for multilayer walls and flat roofs by using periodic solution

A theoretical methodology was developed to find total equivalent temperature difference (TETD) values for multilayer flat roofs and walls of buildings. The TETD values based on time lag and decrement factor are estimated using measured hourly solar radiation on a horizontal surface and outside air temperatures. The time lag and decrement factor are obtained numerically using periodic solution of one-dimensional transient heat transfer problem for the building structures. The problem is initially formulated using a differential equation and the appropriate initial and boundary conditions. It is then converted into dimensionless form and solved by application of complex finite Fourier transform (CFFT). The solution is used to find hourly variation of temperature inside the structure, the heat gain to the building through the structure, the highest and lowest temperatures at the inner and outer surfaces of the roofs and walls, and the time periods involved in reaching these temperatures. Sol-air temperatures for different directions as well as time lag and decrement factor are obtained, and these are used to determine the TETD values of the structures.     

The environmental impact of optimum insulation thickness for external walls of buildings

The city of Denizli is in the 3rd climatic region in Turkey and there is a heating requirement for a period of approximately five months. During this period, thermal insulation of buildings is very important in minimizing the energy usage and reducing emission. In this study, environmental impact of optimum insulation thickness in external walls has been investigated for the case of Denizli, Turkey. In the calculations, coal was used as the fuel source and the expanded polystyrene as the insulation material. The results proved that when the optimum insulation thickness was used, energy consumption was decreased by 46.6% and the emissions of CO₂ and SO₂ were reduced by 41.53%.     

Analytical evaluation of phenolic compounds and minerals of Opuntia robusta J.C. Wendl. and Opuntia ficus-barbarica A. Berger

In this study, 19 phenolic compounds were detected using high-throughput instrument ultra performance liquid chromatography with electrospray ionization tandem mass spectrometry (UPLC–ESI–MS/MS) in Opuntia ficus-barbarica A. Berger and Opuntia robusta J.C. Wendl. fruits. The five macro- and five micro-minerals determined in both species were analyzed using inductively coupled plasma–mass spectrometer. The phenolic compounds, mineral content, and the antioxidant capacity of the fruits of O. robusta and O. ficus-barbarica were analyzed. All phenolic compounds and minerals varied significantly between the two species. The total of phenolic compounds content was calculated as 69.237 and 66.385 mg kg^?1, respectively, in O. ficus-barbarica and O. robusta. Ferulic acid was the highest quantities, 31.620 and 26.931 mg kg^?1 in O. robusta and O. ficus-barbarica, in all phenolic contents, respectively. The macroelements calcium and potassium were the most abundant in both Opuntia species. The antioxidant activity of O. ficus-barbarica and O. robusta fruit samples was measured in the extracts of hexane, ethyl acetate, methanol, and water. The DPPH assay of Opuntia samples displayed a good radical scavenging inhibition, similar to butylated hydroxyanisole and butylated hydroxytoluene standards, as half maximal inhibitory concentration IC₅₀ = 69.32 and 67.57 μg mL^?1 in ethyl acetate extracts of O. ficus-barbarica and O. robusta fruits, respectively. This work presents a suitable method for the extraction, detection, and quantification of phenolic compounds by UPLC–ESI–MS/MS. MS/MS determination for multiclass determination was validated in Opuntia samples obtaining good results.

Abbreviations: ABTS, 2,2′-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid; AChE, acetylcholinesterase; BChE, butyrylcholinesterase; BHA, butylated hydroxyanisole; BHT, butylated hydroxytoluene; DPPH, 2,2-diphenyl-1-picrylhydrazyl; DTNB, (5,50-Dithio-bis(2-nitrobenzoic)acid; ICP/MS, inductively coupled plasma/mass spectrometer; LoD, yhe limit of detection; MRM, multiple reaction monitoring; QEs, quercetin equivalents; PEs, pyrocatechol equivalents; R², correlation coefficients; r, Pearson’s correlation coefficient; SD, standard deviation; TIC, total ion chromatogram; UPLC–ESI–MS/MS, ultra performance liquid chromatography with electrospray ionization tandem mass spectrometry     

An artificial neural network model for the prediction of critical submergence for intake in a stratified fluid medium

Density differences may occur because of temperature differentials, suspended sediments, dissolved salts or other chemicals. Most of the large surface reservoirs are stably stratified throughout most, or all, of the year. One of the means of assisting the management is to allow a selective withdrawal from the reservoir. And while an intake is used for withdrawal (from the lower layer), a maximum discharge is required not allowing the uptake of the upper layer fluids. The value of the intake's vertical distance from the upper layer elevation (submergence) when the upper layer fluids begin to be drawn into the intake is known as ‘critical submergence’. In this study, the critical submergence for a circular intake pipe in a stratified body (which has different layer thickness) is investigated. Experiments were conducted on a vertically flowing downward intake pipe in a still-water reservoir. Artificial neural network (ANN) models and formulas, which are found by the theoretical analysis of critical spherical sink surface (CSSS), are used for the analysis of experimental results. The CSSS has the same centre and discharge as the intake. The ANN model and CSSS results are compared with the experimental results.     

Revised stratigraphy of the Tertiary deposits of Istanbul and their engineering properties

For over 50 years, the Upper Oligocene–Upper Miocene sedimentary sequence in Istanbul has been considered to be formed of two distinct sequences separated by an unconformity. However, recent field observations and an analysis of numerous borehole data indicate the Gürp?nar, Çukurçe?me and Güngören Formations are in fact a single sequence of alternating clay–sand/sandstone beds/lenses, here named the Avc?lar Formation. The Bak?rköy Formation, which is typically composed of carbonate rocks, conformably overlies the Avc?lar Formation. The paper provides the geotechnical parameters of the units within the Avc?lar Formation which it is hoped will facilitate selecting suitable geotechnical and engineering geological parameters to represent the deposits and minimize errors in the interpretation/evaluation of in-situ conditions.     

Radioactive element contents of some granites used as building materials: insights into the radiological hazards

This study was conducted to investigate the radioactive potential hazard of granite, which is widely used as building material in Turkey. Natural radiation levels of 18 various, globally-distributed industrial granite samples imported by Turkey, were analyzed using gamma-ray spectrometer. The results are compared with the formerly published findings of granite samples from Turkey. Radioactivity levels of ²³⁸U, ²³²Th, and ⁴⁰K natural radioactive series elements of the selected 18 specimens were measured, which were from 2.4 ± 0.5 to 88.8 ± 3.6 Bq kg^?1 for ²³⁸U, from 2.4 ± 0.7 to 273 ± 0.9 Bq kg^?1 for ²³²Th, and from 169 ± 24 to 1,479 ± 94 Bq kg^?1 for ⁴⁰K. Radium equivalent activities (Ra_eq) were calculated for the granite samples to assess their radiation hazards in the construction of dwellings. The Ra_eq values of granite samples varied in the range of 39.05–570 Bq kg^?1, only one sample exceeded the safe limit value of 370 Bq kg^?1 set by the OECD-NEA (Nuclear Energy Agency. Exposure to radiation from natural radioactivity in building materials. Report by NEA Group of Experts 1979). Absorbed dose rates in air were found between 18.74 and 261 nGy h^?1 and radiogenic heat production values were calculated in the range of 0.45–6.53 μW m^?3. All rock samples used in this study were also analysed mineralogically and defined their compositions.